Post Top Ad

Post Top Ad

 How to make bathroom bleach cleaner

How to make bathroom bleach cleaner

bathroom bleach cleaner is a strong acid cleaner used to clean and remove yellowing and stains and sterilize toilets and ceramics and remove the limestone deposits causing bad odors and the transport of diseases and is not used to clean marble and is not used to clean clothes and is not used on metal surfaces and gloves should be used when using it.

Raw materials used in bathroom bleach cleaner

hydrochloric acid

  • It is also called the spirit of salt
  • Its chemical symbol is HCl
  • A strong inorganic mineral acid that completely ionizes in water
  • A clear, colorless liquid if it is pure, slightly yellow if there are impurities of other metals dissolved in it.
  • It has a strong pungent smell
  • It is prepared from dissolving hydrogen chloride gas in water or as a by-product in some chemical industries.
  • Among its most important uses is cleaning the surface of steel with a concentration of 18%, producing many organic and inorganic compounds, reactivating ion exchangers and in the manufacture of industrial detergents.
  • Concentrated hydrochloric acid 40% forms foggy smoke and is called fuming chlorine acid, but commercially its concentration is between 30 to 35%
  • He warns against contact with the skin or eyes, because it causes burns and damage to the skin, and its vapor should not be inhaled or touched with the skin and eyes, because it harms the respiratory organs and the stomach.

Nonylphenol Ethoxylate NP9

NP9 is a surface-active detergent and emulsifying agent

Antara™ 430 (Polectron™ 430) polymer

It is mainly used in acidic detergent to form turbidity and distinguish it from water.
There are several types, the most important of which are the acid type that works in an acidic medium from 0.5 to 2, and the aqueous type that is used in the manufacture of freshener, which works well at PH from 6 to 8.

Antara™ (Polectron) 430 polymer is a highly effective opacifier. Antara™ (Polectron) 430 polymer is a white, thermoplastic, 38-41 percent solids, latex produced as a graft, emulsion copolymer of 30 percent polyvinylpyrrolidone and 70 percent styrene.

With a glass transition temperature of approximately 100°C, it forms transparent, thermoplastic films that readily adhere to glass, plastics and metals. Antara (Polectron) 430 polymer is thermally and mechanically stable in the presence of a variety of ionic compounds.
It is used to distinguish acidic product with water

Important notes in bathroom bleach cleaner industry

1- A large amount of heat is released when strong acids are mixed with water. Adding more acid releases more heat. If you add water to acid, you form an extremely concentrated solution of acid initially. So much heat is released that the solution may boil very violently, splashing concentrated acid out of the container! If you add acid to water, the solution that forms is very dilute and the small amount of heat released is not enough to vaporize and spatter it. So Always Add Acid to water, and never the reverse.

2- It is strictly forbidden to add bathroom bleach cleaner to any other cleaner, especially with (chlorine) because it leads to an interaction between them and releaseToxic chlorine gas.

3- Safety measures must be taken while making the bathroom bleach cleaner by using gloves, a face mask, and an apron to protect the body and clothing.

4- The amount of hydrochloric acid needed to obtain a concentration of 10% of the flash acid detergent can be calculated in the following way:

For every 100 kg of detergent you need 10 kg of pure acid
According to the concentration of the acid we have, we calculate the amount of acid required and complete it with 100 kg of water.
Assuming the concentration of hydrochloric acid is 35%, then:
Weight of concentrated acid x its concentration = weight of pure acid x 100
Weight of concentrated acid x 35 = 10 x 100
Weight of concentrated acid = 28.57 kg
If we take 28.57 kg of concentrated acid and complete it to 100 kg with water (taking into account adding acid to water and not the other way around)

5- The method of using the bathroom bleach cleaner: sprinkle the cleaner on the surface to be cleaned, leave for several minutes, then rub it with a cleaning brush, and then rinse with water.

6- It is strictly forbidden to smoke in the place where hydrochloric acid is present and in the place of manufacture.

How to make 65 kg of flash bathroom cleaner

1- The materials used

  • 50 kg distilled or filtered water
  • 15 kg hydrochloric acid 30-35% concentration
  • 150 g Antara™ 430 (Polectron™ 430) polymer
  • 250g Nonylphenol Ethoxylate NP9

2- The modus operand

1- Fill the mixing barrel with 50 liters of filtered water

2- We add 15 kg of hydrochloric acid with a concentration of 30-32%

3- We add acid to water, Not the reverse

4- Then we mix well
5-We add 250g of Nonylphenol Ethoxylate NP9
6-Then continue mixing well

7- we add 150g of Antara™ 430 (Polectron™ 430) polymer

8- It is a substance that forms a white turbidity in the product to distinguish it from water

9- And so we are done with this product

10- And then to packing

No comments:

Post a Comment

Post Top Ad